Pneumatic apparatology for the realization of non-contact dentistry. Unlike rotating cutting instruments, the AquaCare handpiece is not in direct contact with the tooth structure.

+Information

Insumos pensados para lograr la excelencia en pulido y profilaxis. Los polvos de óxido de aluminio en 53 micras y en 29 micras fueron estrictamente diseñados para obtener mejores preparaciones. Los polvos de bicarbonato de sodio logran excelente pulido. Y por último, el polvo de excelencia Sylk® con Novamin® un remineralízante natural.

Compact air drying unit that ensures a suitable air quality for air abrasion and air polishing powders. The dryer removes water from the compressed air used to power the AquaCare unit. Where no dry air supply is available, ensuring the proper operation of units using powders.

3D printer with 4K resolution and 8.9’’ display. Used for printing any type of model, either dental or any area. It is easy to use and contains everything you need for quality work.

Effective washing system and curing function with numerous powerful UV lights. Swivel platform where you can curate your models easily and evenly. Thanks to the light exposure, the degree of uniformity is higher and improves the effectiveness of the post treatment.

Resins for LCD printers. Low viscosity for clean prints and high definition detail. They are presented in different colors and uses.

Kit que consta de 20 jeringas de composite (9 dentinas, 3 esmaltes universales, 3 esmaltes bio function, 2 opalescentes y 3 efectos blancos). Se entrega con el calentador de composite Ena Heat con el que se puede trabajar con dos temperaturas, una para modelar y otra para fluidificar.

4-axis wet dental milling machine that enables milling of up to 3 pieces at the same time. Burs loading capacity of up to 6 units. Easy-to-use software. Auto calibration. Open system.

Smart 5-axis dental milling. Hardware and Software System developed by UP3d. Auto calibration. Single part structure. With resume function, allowing it to automatically fry from the last interrupted step, avoiding repeated work.

Table Scan. All-in-one scanning, compared to the traditional scanning method, the UP400 will save 50% of your working time by scanning a quadrant with just two steps.

Specialised table scan on uncut models, with contactless auto scan. Custom blue light that allows scanning of coloured materials.

Multi-laminated zirconia disk available in measurements D98, D95 and 89-71. Hardness 1100 MPa, translucency 47%. Indicated from unit crowns to bridges of more than 7 units.

Discilicate pills. A ceramic and glass composite material used in the manufacture of single-piece dental prostheses; such as bridges with three pieces, premolar and posterior bridges. It has high translucency and resistance.

Hybrid ceramic with double ceramic structure from 55% to 85%, and polymeric material from 13% to 43%. Adhesive cementation. ML translucency level.

Fast sintering oven for zirconium. It is highly efficient and has an easy-to-use control panel. It also has 2 sintered modes: normal and fast. Moreover, it has 10 programs including ultra-fast sintering, cleaning, etc. Selection of programs according to quantity, size and thickness.

Kit consisting of a short ring (blue), a high ring (orange) and the first separator ring in dentistry for wide preparations (green). They feature Garrison’s unique Soft-Face™ silicone tips for reduced movement and Ultra-grip™ retention extensions that prevent the ring from displacing.

The detachable, simple FitStrips handle makes a big difference for both the doctor's ease of use and patient comfort. The dentist's hand remains out of the patient's mouth, providing a clear field of view and easier operation.

It provides the right materials and technique to approach various types of previous injuries with complete confidence and help recreate the ideal interproximal anatomy quickly and safely.

It makes the scanning experience comfortable for both the dentist and the patient. With powerful hardware and intelligent software, the Medit i700 is the key to unlocking the full potential.

Delicate, transparent and highly accurate scanning, providing an incredible level of detail. With this, dentists can forget about the crooked, low-quality images. It works without dust. Full color HD image capture.

It is a second generation advanced high heat resistance refractory material used to stabilize custom ceramic cooking. The material can be easily molded and used with any type of porcelain.

It is a patented combination of diamond and aluminum developed for efficient polishing of Zirconia and Lithium Disilicate restorations.

Plain and contoured aluminum. Elegant black pearl glass. Intelligent wetting system. Ceramic mixing palette. To be different, you have to rethink and reimagine every element, whether it exists or not.

Now everything is possible with ceramics. We present CeraFirm, the latest mixing system for all ceramics. The stabilizer additive gives you the control you need for high-detail areas. Achieving high-quality ceramic reconstructions has never been easier.

Made from titanium nickel. With its patented C.Wire thermal treatment, it offers an excellent compromise between cutting efficiency and flexibility. Alternative movement offers security, cyclic fatigue resistance and comfort.

Respect for channel anatomy. Elimination of solvent use. Inactive Tip. Rotation speed: 400 - 800 rpm.

Developed to respond to the need for efficient modelling while respecting the initial anatomy of the root channel.

It offers excellent primary stability in soft bone and post-extraction alveoli. Because of its conical form, it is allowed to compress the osteotomy below prepared.

With a reduced coronal design and inverted conical shape it maximizes bone volume at the coronal level.

The T4 box is the most complete on the market. With stepped burs of high strength-cutting capacity and guide system for implant positioning.

Resins for LCD printers. Low viscosity for clean prints and high definition detail. They are presented in different colors and uses.

Resins for LCD printers. Low viscosity for clean prints and high definition detail. They are presented in different colors and uses.

Three pieces of Ribbond of 22cm each in three different sizes, (the standard widths are 2, 3, and 4mm + Ribbond special scissors, (most scissors will not cut Ribbond or frayed). Easy-to-understand instructions. Aluminum foil for pre-measurements in the mouth.

Erkoform-3dmotion es una termoformadora por vacío con reserva de vacíoque y tiene un proceso de termoformado automatizado.
El sistema automático esta limitado a la etapa de trabajo realmente conveniente, es decir, al proceso de termoformado real. Esto evita tener que mover la plancha caliente desde el calentador hacía el modelo y termoformar.

Las dimensiones del Occluform-3 permiten elevar la mordida a valores medios. La elevación de 1 linea al pin de sujeción corresponde aprox. 1 mm de elevación de la mordida al puntero incisal. Si el registro de la mordida está disponible, los modelos son articulados en el Occluform-3 usando el registro mencionado.

Dispositivo de formación a presión con proceso de termoformado automatizado para conectar con el sistema de aire comprimido existente. El calentamiento por infrarrojos de onda media sin tiempo de precalentamiento calienta el material no solo en la superficie sino también en profundidad.